This post here is to unbrick soft bricked Samsung Galaxy S2 I9100G only. Please don’t try this on any other Samsung Galaxy S2 variant. This post here is only for soft bricked device not hard bricked (see the difference).
We are not responsible for any data loss or other problems that occur by using this tutorial. Flashing ROM deletes internal memory. Use at your own risk.
- 1Odin file
- 2Stock ROM
- 3Samsung USB drivers
- 4PC with Windows OS
All download links are provided at the bottom.
Procedure to unbrick soft bricked Samsung Galaxy S2 I9100G :-
Open ODIN and check Auto Reboot and F. Reset Time.
Download the Stock Rom, click on PDA button of Odin and then browse the .tar
Turn off your device and start it in download mode using volume up + home + power button.
Plug your device using USB, if your device is detected, Odin will show yellow box above ID:COMx (x being displayed by the computer on its own, sometimes 7, sometimes 9, sometimes others). If your device is not detected, make sure that device drivers are installed, if not, then install Samsung USB drivers.
Once everything is good, press Start.
Flashing may take 5 – 10 minutes and your device may reboot. Don’t unplug your device or anyhow disrupt this procedure.
Once the process is finished, Odin will show PASS and your device will start normally.
Done !! Your device is successfully unbricked now.
Get Tips for your device, Free!
No Spam Promise, Your email address is SAFE with us!