Unbrick soft bricked Samsung Galaxy S2 I9100

Posted on :

This post here is to unbrick soft bricked Samsung Galaxy S2 I9100 only. Please don’t try this on any other Samsung Galaxy S2 variant like I9100G. This post here is only for soft bricked device not hard bricked (see the difference).

We are not responsible for any data loss or other problems that occur by using this tutorial. Flashing ROM deletes internal memory. Use at your own risk.

Requirements :-

  • 1
    Odin file
  • 2
    Stock ROM For I9100
  • 3
    Samsung USB drivers
  • 4
    PC with Windows OS

All download links are provided at the bottom.

Procedure to unbrick soft bricked Samsung Galaxy S2 I9100 :-

  • 1

    Put Samsung Galaxy S2 into downloading mode using Volume Down + Center button + Power button together for about 10 seconds until your phone reboots and you see the warning sign. Then press Volume Up to enter download mode.

  • 2

    Download the Stock Rom, and extract it.

  • 3

    Download Odin and open it, then connect your device to PC using USB cable, if your device is detected, Odin will show yellow box above ID:COMx (x being displayed by the computer on its own). If your device is not detected, make sure that device drivers are installed, if not, then install Samsung USB drivers.

  • 4

    Make sure that only Auto Reboot is selected, then click on PDA and browse the .md5 that you extracted from the ROM and once everything is good, press Start.

    Unbrick Samsung Galaxy S 2 I9100 odin

  • 5

    Flashing may take 5 – 10 minutes and your device may reboot. Don’t unplug your device or anyhow disrupt this procedure.

  • 6

    Once the process is finished, Odin will show PASS and your device will start normally.

    Unbrick Samsung Galaxy S 2 I9100 odin pass

  • 7

    Done !! Your device is successfully unbricked now.

Downloads :

Content Protection by DMCA.com

Get Tips for your device, Free!
No Spam Promise, Your email address is SAFE with us!

Rohan Kandwal

I am an Android Enthusiast and love to learn new techniques, tips and tricks. I also love to help other who face any difficulty in using technical stuff.. Google+

  • vikram

    Thank you so much …..my samsung galaxy Gt i9100 was bricked when i tried to update it to kitkat as i did not selected the usb debugging option..and it was giving error status 7 ….i followed the above steps and unbricked my favourite mobile….once again thank you bro….

    • RohanKandwal

      Glad I could help you bro.

  • Wêšşâm Khãttäb

    Still Stuck boot.bin and nothing happen !!!!!!!!!!!!!!!!

    • RohanKandwal

      Only writing nothing happen won’t help. Tell me how you bricked it? What you have tried? Which firmware version you were on and which you are trying to flash?

  • Dipesh Lahoti

    Dude… Seriously … I am very very thankful to u… You saved my life buddy…!!! I flashed wrong rom once n my device was bricked… This way as above… its Fine Now!!! 😀 😀 😀 I Love You…. (I know i m going too far now..!! 😛 ) Thanks a ton … Keep up the Good Work.. :)