Unbrick soft bricked Galaxy Mega (All variant)

Posted on :

This post here is to unbrick soft bricked Galaxy Mega and will work on every Galaxy Mega variant.  Just download the firmware for your own Galaxy Mega variant. Also this post here is only for soft bricked devices only not hard bricked (Difference between soft bricked and hard bricked device).

We are not responsible for any data loss or other problems that occur by using this tutorial. Flashing ROM deletes internal memory. Use at your own risk.

Requirements :-

All download links are provided at the end of the post.

Procedure to unbrick soft bricked Galaxy Mega (All variant) :-

  • 1
    Download and install USB drivers for your device. This you can get by visiting your manufacturer’s site and checking the download section for your device.
  • 2
    Download and extract Odin zip file from the links below and extract it. Inside you will find an Odin3 v3.07.exe executable file. Run it as Administrator.
  • 3
    Download and extract the correct firmware for your device that you got from requirement’s step 2. Inside you will find a .md5 file.
  • 4
    On Odin click on PDA button and browse the .md5 file that you just got after extracting the firmware zip file.
  • 5
    Make sure that only Auto Reboot and F. Reset time check boxes are checked. Re-partition check box should be unchecked.
  • 6
    Switch off your device and boot your device into Downloading Mode by pressing and holding Volume down + Home + Power button until you see a warning screen. Once there press Volume up to enter into downloading mode.
  • 7
    Next plug in your device into PC using the USB cable. If Odin detects your device correctly then ID:COM box will turn light blue. If not, then make sure that you are in downloading mode and drivers for your device are correctly installed. Also try re-plugging your device into a different port or using a different USB cable.
  • 8
    Once every above step is followed correctly, press on Start button to start the flashing procedure. DON’T INTERRUPT FLASHING PROCEDURE FOR ANY REASONS WHATSOEVER OTHERWISE YOUR DEVICE MAY BE HARD BRICKED.Unbrick soft bricked Samsung Galaxy Grand Duos GT-i9082
  • 9
    Flashing process takes some time to complete so have patience and let it finish. Once the flashing process is completed, Odin will show PASS and your device will reboot.Pass Message Odin3 v3.07
  • 10
    First boot is always the longest. After sometime your device will successfully boot into home screen.

Done!! Your device is successfully unbricked now.

Downloads :

Content Protection by DMCA.com

Get Tips for your device, Free!
No Spam Promise, Your email address is SAFE with us!

Rohan Kandwal

I am an Android Enthusiast and love to learn new techniques, tips and tricks. I also love to help other who face any difficulty in using technical stuff.. Google+

  • nate crawford

    how do i disable write protection on my metro pcs galaxy mega 6.3 cause when i put it in download mode it says at the top factory mode now instead of odin mode and it say’s write protection enable which must be why when i try to flash the stock jellybean firmware using odin i get a fail.

    • RohanKandwal

      Have you unlocked your bootloader? You need to unlock bootloader before trying to flash any ROM.

  • Dark

    Thank you!